Touchless Motion Activated Sink Faucet Features

Fits all US standard plumbing.
Uses 4AA Alkaline Batteries (purchase separately).
Water Pressure: 0.5 - 7.0 KGS/cm, 10-125 psi.
Motion detection touchless sensor faucet operation
Commercial
Sensitive Sensor with Infrared AI Smart-Chip
Factory set to 30-second Auto Shutoff (can be adjusted).
Water Pressure: 0.5 - 7.0 KGS/cm, 10 - 125 psi
Solid Brass Construction, Brushed Nickel Finish
Easy to Install - Instructions Included
Water-resistant solenoid enclosure
Advanced energy-saving design for long-lasting battery life
Comes complete with Hoses & Accessories
Power Supply: AC110V And DC6V (batteries not included)
AC/DC power option.
ADA Compliant.
Can be installed easily in new or upgraded retrofit commercial restrooms.

Intelligent: with its micro-computer controlling its action, the faucet can self-adjust its best detection zone as per the color and shape of the lavatory! The Sensor Faucet finish is Brushed Nickel, with a built-in Infrared AI Smart-Chip No Water Dripping Design with 100% Touch-free operation.

Reduces the transfer of germs by preventing cross-contamination and re-contamination of germs and bacteria by not touching the faucet. Cut down on water usage by minimizing waste of water by eliminating unnecessary or unattended water flow.

Infrared sensor operated, touch-free operation

Advanced energy-saving design for long-lasting battery life

Waterproof sensor

Battery low LED light indicator

Sensing distance adjusted automatically

Long life durable body

Advanced circuit design saves electricity and water

For longevity of lifetime and to stand against daily wear and tear the brushed nickel finish used is PVD coatings

Sensor Faucet Advantage

Conserves water

Saves energy during the water heating process

Hygienic, no-touch activation

Easy installation

Durable, solid all-brass construction

Built-in filter

Perfect for individuals with disabilities, the product is designed to be in accordance with ADA (Americans with Disabilities Act) guidelines.

Vandal resistant

Waterproof Components

Solo Sensor Activated Faucet Special Features

Durable Vandal-Resistant Brass Body; Ideal for commercial high use applications
Intelligent: with its micro-computer controlling its action, the faucet will self-adjust its best detection zone as per the color and shape of the lavatory
Flashing light indicator; diagnostic indicators for power up, low battery, and solenoid function.
The meanings of the codes are described in the installation instructions.
Convenient to maintain; with a built-in strainer to prevent sundries from entering the solenoid valve and the strainer is easy to clean
The faucet can be mounted to any sink surface.
ADA Compliant.
The battery's life is 8,000 cycles per month and with enough water pressure is approx 5 years service life of the batteries.
Adjustable sensing range; while the factory range is set about 4" to 5" from the sensor, it can be adjusted.

Solo Sensor Activated Faucet Specifications

Diameter of inlet pipe: DN15
Diameter of outlet pipe: DN15
Faucet height: 7.87" (200mm)
Spout Length: 4.13" (105mm)
Water Pressure: 0.05Mpa - 0.7Mpa
Power: DC.6V
Power Consumption: 0.5MW
Detection Zone: Factory set 25cm/10" (based on standard inductive board)
Ambient Temperature: 1 - 45 Â°C / 33.8 -113 Â°F
Degree of protection by enclosure: 1P56
Battery: 4 x 'AA' size cells
Operational water pressure range: 0.05 - 0.6MPa
US standard water supply pipe size: DN15 (G1/2")
Ambient temperature range: 0.1 - 45ÂºC
Sensing distance: 9.84" (25cm)
Time delay: 0.5 seconds
Operation duration: Power will automatically cut off after continuous use for 60 seconds
Pop-up drain: No
Color: Brushed Nickel Finish