How to install Fontana Lenox Bathroom Commercial Wall Mounted Automatic Liquid Automatic Soap Dispenser | BS9799-L
Easy step by step Installation Instructions for Sensor Soap Dispenser |
|
Visit Product Page
|
|
- Before you begin, please read the installation instructions below. Observe all local building and safety codes.
- Unpack and inspect the products for any shipping damages. If you find damages, do not install.
- Please note all products must be installed by a professional and certified plumber otherwise warranty might be voided.
|
sensor
|
|
|
Automatic Soap Dispenser Installation Instructions
| |
|
1. Fill the soap bottle with soap for the first use. 2. Press and hold the button until soap is dispensed from the nozzle. 3. Place hand below the nozzle to dispense soap into the palm of hand.
CARE AND MAINTENANCE If the soap dispenser fails to function correctly, firstly check all connections are tight and free from air leaks. If dispenser still fails to function, place manifold into a bottle of warm water. Pump the warm water through the dispenser to dislodge any dried soap residue and then refit the manifold into the soap bottle.
Watermarks and soap residue on polished chrome surfaces are best cleaned using warm water and a mild detergent. Use a stainless steel cleaner for brushed stainless steel soap dispensers. Never use an abrasive cloth to remove stubborn stains. Dry with a soft clean cloth.
| | | • ALWAYS mount the soap tank feeding the dispenser/s BELOW the level of the dispensers
• NEVER mount the soap tank feeding the dispenser/s ABOVE the level of the dispensers
Also please note: The soap type and brand used in these dispensers should not be altered throughout the life of the dispenser as mixing soaps can affect their chemical characteristics and cause them to become more aggressive. If another soap type or brand is needing to be used then the previous type must be thoroughly flushed through and cleaned from the soap dispensers and system prior to its use. |
| |
| | | |
| |
|
Fontana Lenox Bathroom Commercial Wall Mounted Automatic Liquid Automatic Soap Dispenser
| The Commercial Brass Construction Automatic wall mount brass electronic liquid soap dispenser which can dispense the soap efficiently. All in one sensor design and with 1.32 gal (5L) capacity soap container can pump out soap right after sensed by the sensor eye. Use multi-voltage power supply, suitable for input voltage between AC 100V-240V and it can meet the requirement of different projects. It saves soap ,saves water, saves time as well. This touchless motion sensor faucet reduces the transfer of germs by preventing cross-contamination and re-contamination of germs and bacteria by not touching the faucets or handles. It cut down on water usage by minimizing waste of water while soaping, lathering, scrubbing by eliminating unnecessary and unattended water flow. Convenient to maintain with built-in strainer to prevent sundries from entering the solenoid valve and the strainer is easy to clean. It can be mounted to any sink surface.Ideal for commercial use applications in public restrooms, restaurants, office building, public facilities, hospitals. |
|
|
|
Features:
|
Visit Product Page |
- Brand Name: FontanaShowers
- Model Number: BS9799-L
- Material: Brass
- Feature: Foam Soap Dispenser
- Finish: Light oil Rubbed Bronze
- Liquid Soap Dispenser Type: Automatic Soap Dispenser
- Type:Stainless steel Automatic Liquid Soap Dispenser
- Structure: Wall and Deck Mount
- Function: Anti-bacteria
- Capacity: 1.32 gal(5L)
- Power: AC 100V- 240V
- Warranty: 5-Years
|
|
|
|
|