How to install Fontana Brushed Nickel Rotatable Double Sensor Temperature Control Led Faucet | FS1081B
Easy step by steps installation instructions for Motion Sensor Faucet
|
|
Visit Product Page
|
|
- Before you begin, please read the installation instructions below. Observe all local building and safety codes.
- Unpack and inspect the products for any shipping damages. If you find damages, do not install.
- Please note all products must be installed by a professional and certified plumber otherwise warranty might be voided.
|
sensor
|
|
|
Sensor Faucet Installations Instructions
Size | faucet | Hole Size Chart |
| |
| | | |
| | | Size 1: Deck Mount Installation | | Step 2: |
| sensor |
|
| | | Step 3: Connect to Power Supply | | Step 4: Flush debris from waterpipes |
| |
|
| |
| Step 5: | | Step 6: (Correct way for Hose) |
| |
|
| |
|
| | |
| |
|
Before installing your new mixer, flush through the pipework to ensure removal of debris, turn off the water supply.
Ensure the ‘O’ ring is in place at the bottom of the mixer body.
Push the control cable down through the hole and position the mixer on the basin. From the underside of the basin fit the rubber washer, metal washer onto the threaded tube followed by the nut. Tighten the nut to clamp the mixer to the basin. Tighten the 2 side screws up onto the washer.
CAUTION: Do not over tighten the nut/bolts as this may damage the basin.
Screw the two flexible pipes to the mixer body, but do not over tighten, hand tighten only.
Connect the water supply to the inlet pipes. The hot water should be connected to the front pipe.
Plug together the connectors coming from the mixer to the transformer. Line up the flats on both the plug and socket and firmly push together.
| | | Flexible Connecting Hose Care must be taken when connecting the flexible connection hose from the power supply box to the spout to ensure it does not bend sharply and kink or twist. See above for recommended ways to fit the flexible connecting hose.
Important: Failure to follow these guidelines may result in poor performance and damage to the flexible connection hose.
| | | Bathroom Rotatable Double Sensor Hot And Cold Water Basin Led Faucet
Suitable for: Undercounter, Bathroom Basin Temperature control type: Thermoregulation for cold and hot water Dia. of Inlet: DN15 (G1/2') Installing Hole: 35 mm Body Material: 59 Brass Power Input: DC 6V or AC 200V Water saving: 50% Water Pressure: 0.05 - 0.7 MPa Distance Adjusted: By Remote Controller Sensor distance: Front: 30±2 cm, Side: 5±1 cm Waterproof: IP56 Lifetime: ≥500,000 times Faucet Size: 51*195*174 mm
Product features: 1. Automatic on/off: infrared sensor faucet automatically turns on and off. 2. There is a mixer within the faucet to adjust the water temperature in cold or hot water 3. Led light will be work while the water is in flow. 4. Convenience: a) Side Sensor----This is a wave-on sensor. Function: Hands wave once, the water automatically flows while hands wave again water automatically stops. b) Front Sensor----This is an automatic sensor. Function: Hands in sensor range, the water automatically flows while hands out of sensor range, the water automatically stops. 5. Hygienic: Touchless design provides hands-free and germ-free operation. 6. Water saving: Water-efficient faucet reduces overall water usage without sacrificing water pressure. 7. Sensor indicator light will blink every 3 to 4 seconds alerting users to replace batteries. 8. Energy saving: Battery will last approximately 7,000 items/month for one year. 9. Indicator light will flash when battery power is lower than 4.5V. |
|
|
|
|
|
|
|
|
|
|
|
|
Fontana Brushed Nickel Rotatable Double Sensor Temperature Control Led Faucet
There is a faucet in a class of its own. It has a brushed nickel finish which sets your restroom apart from others. The infrared sensors enable totally hands-free operation, effectively preventing the transfer of germs. This sensor sink faucet is compatible with all standard US plumbing. The faucet can be used in commercial and residential locations, and is ADA Compliant, and has a 5-years warranty. This cast brass electronic faucet in reducing the transfer of germs by preventing cross-contamination and re-contamination of germs and bacteria by not touching the faucets or handles. The faucet comes with easy installation instructions and all the required hoses and accessories. The Infrared AI Smart-Chip enables complete touch-less operation.
|
|
|
Features:
|
Visit Product Page |
- Brand Name: Fontana
- Model Number: FS1081B
- Type: Sink Faucet
- Valve Core Material: Ceramic
- Surface Treatment: Brushed Nickel
- Faucet Mount: Single Hole
- Installation Type: Deck Mount
- Style: Contemporary
- Material: Brass
- Usage: Water Closet
- Warranty: 5-Years
- Water Pressure: 1.6mpa
- Usage: Commercial / Residential
- Ideal for commercial use applications in public restrooms, restaurants, office building, public facilities, hospitals. Fits all standard US plumbing.
|
|
|
|
|