You are here: Home > Installation Instructions for Fontana Reno Commercial Automatic Chrome Finish Sensor Faucet

How to install Fontana Rio Brushed Nickel Commercial Temperature Control Wave Electronic Automatic Sensor Faucet | FS6109B


Easy step by steps installation instructions for Sensor Faucet

Visit Product Page
  • Before you begin, please read the installation instructions below. Observe all local building and safety codes.
  • Unpack and inspect the products for any shipping damages. If you find damages, do not install.
  • Please note all products must be installed by a professional and certified plumber otherwise warranty might be voided.
sensor


Sensor Faucet Installations Instructions

Size: Hole Size:



Features:
- Cold and Hot integration. It is a mixer with the cold water in the left turning and hot water in the right turning.
- Water-saving: Water flows out when your hands approach the induction zone, and stop immediately once you draw back your hands.
- Low power,electricity-saving: For DC type, 4pcs AA batteries can be used for about 2 years, if the faucet working 200 times a day.

Specification:
- Installation Type: Deck Mounted
- Installation Holes: One Hole
- Valve Type: Ceramic Valve
- Temperature of environment:1-45°C (cold & hot water )
- Water Pressure: 0.05 Mpa - 0.7 Mpa
- Dia of inlet pipe: G1/2"
- Dia of outlet pipe: G1/2"

Smart infrared sensor automatically adjusts the distance according to the environment.



Size 1: Deck Mount InstallationStep 2:

sensor


Step 3: Connect to Power SupplyStep 4:





Step 5:Step 6: (Correct way for Hose)





Before installing your new mixer, flush through the pipework to ensure removal of debris, turn off the water supply.

Ensure the ‘O’ ring is in place at the bottom of the mixer body.

Push the control cable down through the hole and position the mixer on the basin. From the underside of the basin fit the rubber washer, metal washer onto the threaded tube followed by the nut. Tighten the nut to clamp the mixer to the basin. Tighten the 2 side screws up onto the washer.

CAUTION: Do not over tighten the nut/bolts as this may damage the basin.

Screw the two flexible pipes to the mixer body, but do not over tighten, hand tighten only.

Connect the water supply to the inlet pipes. The hot water should be connected to the front pipe.

Plug together the connectors coming from the mixer to the transformer. Line up the flats on both the plug and socket and firmly push together.




Flexible Connecting Hose

Care must be taken when connecting the flexible connection hose from the power supply box to the spout to ensure it does not bend sharply and kink or twist.
See above for recommended ways to fit the flexible connecting hose.

Important: Failure to follow these guidelines may result in poor performance and damage to the flexible connection hose.








Fontana Rio Brushed Nickel Commercial Temperature Control Wave Electronic Automatic Sensor Faucet


If you want comfort and elegance in one faucet, our Fontana brushed nickel finish infrared faucet is what you need. Not only it looks great, but you can also fully enjoy the benefits of a temperature control wave electronic sensor faucet in your bathroom or kitchen. It is powered by 4 AA alkaline batteries, with an estimated life time of 2 years at 300 cycles per day. It is deck mount, single hole, with automatic shut-off water saving flow control. This touchless faucet is built with the best materials with ceramic valve core, for best performance and long lasting life time. It comes complete with accessories and installation instructions. Ideal for commercial use applications in public restrooms, restaurants, office building, public facilities, hospitals. Fits all US Standard plumbing.


Features:

Visit Product Page

  • Brand Name: Fontana
  • Model Number: FS6109B
  • Surface Treatment: Brushed
  • Water Pressure: 0.05-0.6MPa
  • Surface Finish: Brushed Nickel
  • Faucet Mount: Single Hole
  • Faucet height: 5.5"
  • Spout length: 7.2"
  • Spout Height: 4.1"
  • Style: Contemporary
  • Sensing: Infra-red Sensor
  • Operating Temperature: 0.1-50℃
  • Installation Type: Deck Mounted
  • Power Supply: DC & AC
  • Sensing Distance: 6.2-12.5" or adjustable
  • Battery Lifespan: 100000 cycles
  • Working Power Consumption: 0.5mw
  • Inductive Opening Time: < 1 second
  • Inductive Closing Time: < 2 second
  • Dia.of inlet/ outlet pipe: G1/2"
  • Usage: Commercial / Residential




Shower & Faucet Installation Instructions