Size 1: Deck Mount Installation		Step 2:
	sensor
Step 3: Connect to Power Supply		Step 4:
Step 5:		Step 6: (Correct way for Hose)

Before installing your new mixer, flush through the pipework to ensure removal of debris, turn off the water supply. Ensure the ‘O’ ring is in place at the bottom of the mixer body. Push the control cable down through the hole and position the mixer on the basin. From the underside of the basin fit the rubber washer, metal washer onto the threaded tube followed by the nut. Tighten the nut to clamp the mixer to the basin. Tighten the 2 side screws up onto the washer. CAUTION: Do not over tighten the nut/bolts as this may damage the basin. Screw the two flexible pipes to the mixer body, but do not over tighten, hand tighten only. Connect the water supply to the inlet pipes. The hot water should be connected to the front pipe. Plug together the connectors coming from the mixer to the transformer. Line up the flats on both the plug and socket and firmly push together.
Flexible Connecting Hose Care must be taken when connecting the flexible connection hose from the power supply box to the spout to ensure it does not bend sharply and kink or twist. See above for recommended ways to fit the flexible connecting hose. Important: Failure to follow these guidelines may result in poor performance and damage to the flexible connection hose.

Automatic faucet functions:

1) Water saving: water flows when your hands approach and stop immediately

2) Hygienic: auto-open and close to the hands free from any touch, which can Avoid mutual bacteria infections

3) smart: with its microcomputer to control its action, the tap can AUTO adjusts its best detection zone based on bath color and shape

4) Low power consumption: For DC scrubbers, 4AAA alkaline batteries can be used to 2 years at 200 cycles per day

5) Samples: low cost and freight available

Automatic faucet advantage:

Works with infrared sensor, works without contact;

Advanced energy-saving design for long battery life;

Waterproof sensor components;

Low battery LED light indicator;

Automatically self-adjusting sensing distance;

Long-lasting durable body: solid brass;

Adequate electricity-saving advanced circuit design;

Battery: 4 AAA size batteries

Additional Features: Intelligent: with its micro-computer smart chip controlling its action, the faucet will self adjust its best detection zone as per the color and shape of lavatory Low power consumption: 4AA alkaline batteries can be used for 2 years at 200 cycles a day Convenient to maintain: Built-in strainer prevents sundries from entering the solenoid valve and the strainer is easy to clean Water conservation isn't a novel concept, but emerging forces are creating renewed attention among consumers. With the prospect of water resources drying up, facility executives and home owners must find new ways to conserve water. Sensor Faucets for residential use have been the latest trend. The battery-powered faucets features an infrared sensor and: Easy to operate; Stop the spread of germs & bacteria; Environment friendly Minimize waste of water; Prevent scalding injury; Power Consumption: 0.5mW Power : DC6V (4AA Alkaline batteries) Touch free operation!!! The automatic faucet provides water only when needed. Additionally, since these faucets are preset to shut off after approximately 30 seconds, accidental flooding can't occur if a person leaves it running. And, because they are hands-free, they help reduce the spread of germs and keep the vanity area clean. Fits all standard faucets. The faucet is powered by four batteries which eliminates the need to run any electrical lines to the system. It is designed for ease of installation in new and retrofit applications. Uses 4AAA Alkaline Batteries. Water Pressure: 0.5 - 7.0 KGS/cm, 10-125 psi.
Diameter of inlet pipe DN15 Diameter of outlet pipe DN15 Water Pressure 0.05 Mpa - 0.7 Mpa Power and Voltage DC.6V AC.220V - 50/60Hz Power Consumption 0.5MW 2W Detection Zone Factory set 25cm/10" (based on standard inductive board) Ambient Temperature 1 - 45 °C / 33.8 -113 °F Degree of protection by enclosure 1P56

Fontana Commercial Brushed Nickel Automatic Thermostatic Sensor Faucet

Thermostatic technology that controls the temperature fluctuations at the outlet, preventing scalding,while mixing the water at the desirable temperature at the point of use. This contemporary angled spout single post AC operated faucets provide facilities with ultimate reliability and easy maintenance. Perfect for hotels, private washrooms and other public commercial lavatories, this faucet features an integrated above counter mixer built into the faucet body, a 2-8 inch sensor range, and built in brass solenoid. maintenance of this faucet is simple and can be performed in minimal time. The faucet is equipped with a sensor override and a 60-second time out feature to prevent floods. The Fontana® faucet line is certified to meet ASME A112.18.1/CSA B125.1.All Parts in one perfect product;Ceramic Cartridge;Built-in check valve;Sensor control;Thermostatic sensor faucet (mixer) with advanced infrared sensor technology. Ideal for commercial use applications in public restrooms, restaurants, office building, public facilities, hospitals. Fits all US Standard plumbing.

Features:

Visit Product Page

Brand Name: Fontana Model Number: FS-5137B Type: Automatic Faucet Water Pressure: 0.05Mpa - 0.7Mpa Finish: Brushed Nickel Construction: Solid Brass Power Supply: AC110V And DC6V Batteries Included: Not Mounting Type: Deck Mount Useage: Commercial and Residential Body Material: Brass Style: Contemporary Sensing distance: Remote Control Mounting Type: Single hole Valve Core Material: Ceramic Supply: DC6V (4 X AAA Battery) Usage: Commercial/Residential