You are here: Home > Automatic Soap Dispenser Troubleshooting
Automatic Soap Dispenser Troubleshooting
hTech

Automatic Soap Dispenser Troubleshooting

Fontana offers the best and high-quality soap dispensers that are perfect in working but as these are automatic, so troubleshooting may occur in automatic soap dispensers. Due to this, the automatic soap dispenser stops working. If your soap dispenser is not dispensing soap from the pump then there would be a specific reason behind it. The dispenser stops its function if pump of the dispenser is broken or leak. Clogging in the pump and depression of trigger also stops the functioning of the soap dispenser. Dead battery and obstructed sensor also cause troubleshooting.

In any case you need to check the proper structure of the soap dispenser and then try to fix them. If your dispenser pump is not dispensing soap due to clog inside it, then remove all parts of the dispenser and clean them. Then soak these parts into the hot water, it will help to unclog the material in the tube and pump. Clogging in the pump also leads to leaking, and you can fix this issue in the same way. The automatic soap dispensers usually face battery low or dead issue. In case of low battery the blue indicator light start blinking. If the batteries are rechargeable then charge them rapidly or if they are dead then replace the batteries with new one. If batteries are fresh then check the sensor. Clean the sensor with some vinegar on the soft cloth because due to grim or soap scum the sensor doesn’t sense the hand presence under it. If everything is alright then check your soap dispenser to any expert.




Automatic Soap Dispenser Troubleshooting